Traktor Pro Recording No Sound

Posted By admin On 13.12.20
  1. Traktor Recording No Sound
  2. Traktor Pro Recording No Sound Free
  3. Traktor Pro Recording No Sound Download
  4. Traktor Pro Recording No Sound System
  5. Traktor Pro 2 Mac
  6. Traktor Pro 2 Download

Feb 09, 2014  Ok the reason the sound is coming through one channel is because it is running from the master. Go to output routing and at the top change the mixing mode to external then it is will give you sound outputs for each traktor deck look at the pic traktor. Aug 30, 2018  TRAKTOR’s intelligent features now allow for even easier remixing of tracks on the fly. Switch any deck to a Sample Deck and load up to four loops or one-shot samples each – 16 in total. The new Loop Recorder can record loops from mixer channels, master out or audio. Get ready to unleash the full sonic potential of your tracks with TRAKTOR AUDIO 6, the high-gain audio interface for DJs who demand premium sound quality and extra-loud output. TRAKTOR AUDIO 6 boasts six inputs and six outputs and can be the centerpiece of your live or studio setup.

Traktor Recording No Sound

22nd October 2017

Traktor Pro Recording No Sound Free

Here for the gear

Traktor Pro Recording No Sound Download


Hey all,
I have Traktor S2 and I'm using the internal recording. I know that if I don't want loss in quality I should never reach the reds, and usually set up the recording gain to -3 or lower.
However, I've done a little experiment. I recorded a track via Traktor with the recording gain set to 0, and the track overall gain also set to 0 (compensating for the loss db by auto gain), to simulate a recording of the track just as it is.
When I open the recorded track in Ableton, I see it never reaches the red (just like the original track when I open it in Ableton as well).
But when in Traktor, it always shows red when I do that. So either:
1) Traktor recording at 0 gain is making me lose quality because. red.
2) I'm forced to turn the recording gain to -3 in order to not lose quality, but i'm losing sound volume for nothing.
If anyone could make this any clearer, I'd really appreciate this.
Thanks!
Traktor Pro Recording No Sound

Traktor Pro Recording No Sound System

Traktor Pro Recording No Sound
Quote

Traktor Pro 2 Mac

  • This topic has 10 replies, 1 voice, and was last updated 7 years, 9 months ago by .

  • I have traktor pro 2 installed and my hercules e2 controller works fine with it, all controls are fine but no sounds played through traktor play.
    Under Audio setup i have the following settings:
    Audio device: ASIO4ALL v2
    Sample rate: 24000Hz
    Latency: 512

    Then under the ‘Built in soundcard’ bit i have ASIO4ALL selected again. The only other choice being something called” Conexant 20561 smartaudio ( (Wassapi) (Shared mode))”

    I have no idea what to do with input & output routing, but have had no luck with just guessing. could really use some help people. if you need any more info, let me know. thanks

    On Audio Setup, select “ASIO4ALL” for audio device. Then, on Output Routing, select “Internal” for mixing mode, on Out Master select 1: Front Left, then 2: Front Right. Output Monitor should be 3: Back Left, then 4: Back Right.

    Degenerate, post: 21893, member: 2367 wrote: Alvin, in output routing the only options available for anything under the output routing tab is, “HD Audio digital out 1” and “HD Audio digital out 2”. Oh and im using a hercules e2 mixer so i’d need to use external mixer right? cheers man

    So I’ve checked your controller the Hercules E2, and learned that it doesn’t have a built-in soundcard. And, the computer that you are connecting to is using a Digital-Out interface, which means your ordinary 3.5mm will not work with it. You will need a S/PDIF is a digital audio interconnect to RCA cable to be able to connect it to an external mixer or speakers.

    Try using Conexant 20561 smartaudio ( (Wassapi) (Shared mode)) as your audio setup and use “internal” in your output routing select “anything” that is available on your drop down list and see if any sound is produced in your computer.

    If it still doesn’t work, then your computer’s soundcard doesn’t support external audio routing, you may need to buy a DJ soundcard like one of these: http://www.digitaldjtips.com/2010/11/6-budget-dj-sound-cards/

    Degenerate, post: 21893, member: 2367 wrote: Alvin, in output routing the only options available for anything under the output routing tab is, “HD Audio digital out 1” and “HD Audio digital out 2”. Oh and im using a hercules e2 mixer so i’d need to use external mixer right? cheers man

    So I’ve checked your controller the Hercules E2, and learned that it doesn’t have a built-in soundcard. And, the computer that you are connecting to is using a Digital-Out interface, which means your ordinary 3.5mm will not work with it. You will need a S/PDIF is a digital audio interconnect to RCA cable to be able to connect it to an external mixer or speakers.

    Try using Conexant 20561 smartaudio ( (Wassapi) (Shared mode)) as your audio setup and use “internal” in your output routing select “anything” that is available on your drop down list and see if any sound is produced in your computer.

    If it still doesn’t work, then your computer’s soundcard doesn’t support external audio routing, you may need to buy a DJ soundcard like one of these: http://www.digitaldjtips.com/2010/11/6-budget-dj-sound-cards/

    Degenerate, post: 21893, member: 2367 wrote: Alvin, in output routing the only options available for anything under the output routing tab is, “HD Audio digital out 1” and “HD Audio digital out 2”. Oh and im using a hercules e2 mixer so i’d need to use external mixer right? cheers man

    So I’ve checked your controller the Hercules E2, and learned that it doesn’t have a built-in soundcard. And, the computer that you are connecting to is using a Digital-Out interface, which means your ordinary 3.5mm will not work with it. You will need a S/PDIF is a digital audio interconnect to RCA cable to be able to connect it to an external mixer or speakers. Diva vst plugin free download.

    Try using Conexant 20561 smartaudio ( (Wassapi) (Shared mode)) as your audio setup and use “internal” in your output routing select “anything” that is available on your drop down list and see if any sound is produced in your computer.

    If it still doesn’t work, then your computer’s soundcard doesn’t support external audio routing, you may need to buy a DJ soundcard like one of these: http://www.digitaldjtips.com/2010/11/6-budget-dj-sound-cards/

    3D 5.1 soundcards will work as long as you have two separate outputs. But, if you want to connect it to high-powered mixers and speakers, then I recommend buying a DJ soundcard from numark or native instruments. That way there would be no distortion if you pump up the volume.

  • Posts

Traktor Pro 2 Download

  • The forum ‘DJing Software’ is closed to new topics and replies.